| Warranty: | 1 Year |
|---|---|
| Type: | Concrete Pump |
| Shotcrete Type: | Wet |
| Machining Process: | Hydraulic |
| Structure: | Cylinder Type |
| Productivity: | 180m3/H |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier One Button Stabilization Technology
The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.
Boom Anti Vibration Technology
The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
Energy Saving Technology
With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
Anti Overswing Technology
By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%
Fault Self Diagnostic Technology
Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
Smart Boom System
One Button Boom Extend/Retract
Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.
Coordinated Section Operation
The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections
Safety Technology
Boom Overload Protection Technology
Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.
Hopper Screen Interlock Technology
As an operator protection measure, the pump will automatically stop when the hopper screen is opened.
Hydraulic Oil Level Monitoring
The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.
Parameter| Model | Unit | SYM5180THBES 30C-8 | ||
Overall Specification |
length |
mm | 10690 | |
| Width | mm | 2500 | ||
Height |
mm | 3760 | ||
Dead weight |
kg | 18000 | ||
Boom & Outrigger Specification |
Vertical reach |
m | 30.1 | |
Horizontal reach |
m | 26.5 | ||
Reach depth |
m | 15.2 | ||
Unfolding reach |
m | 9.6 | ||
1st section |
Length |
mm | 7676 | |
Articulation |
89° | |||
2nd section |
Length |
mm | 6090 | |
Articulation |
180° | |||
3rd section |
Length |
mm | 6100 | |
Articulation |
245° | |||
4th section |
Length |
mm | 6635 | |
Articulation |
230° | |||
Rotation |
360° | |||
| Outrigger spread L-R---front | mm | 5850 | ||
Outrigger spread L-R---rear |
mm | 5000 | ||
Pumping Systerm Specification |
Output |
m³/h | 108 | |
Pressure |
Mpa | 6.6 | ||
Max. strokes per minute |
times/min |
25 | ||
Delivery cylinder diameter |
mm | 230 | ||
Stroke length |
mm | 1600 | ||
Hydraulic system |
Open |
|||
Hydraulic system oil pressure |
Mpa | 32 | ||
Oil tank capacity |
L | 320 | ||
Water tank capacity |
L | 300 | ||
Pipeline size |
mm | 125 | ||
End hose length |
m | 3 | ||
End hose diameter |
mm | 125 | ||
Chassis Specification |
Chassis brand | |||
Chassis model |
SYM1180T1E | |||
Engine type |
J08E-WY | |||
Engine maximum net power |
kW/rpm | 194/2200 | ||
Emission standard |
China stage 5 | |||
| Capacity of fuel tank | L | 300 | ||
Displacement |
L | 7.684 | ||
| Max.speed | km/h | 90 | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}