Band New Caterpillar Hydraulic Excavator 320gc

• Type: Crawler Excavator
• Usage: Special Excavator, Marine Excavator, Mining Excavator, GM Excavator
• Bucket: Grab Shovel
• Transmission: Hydraulic Transmission
• Drive Type: Electric Drive
• Bucket Capacity: 0.5~1.0m³
• Model NO.: 320GC
• Size: Medium-Sized
• Certification: CE, ISO9001: 2000
• Condition: New
• Color: Yellow
• Transport Package: Nude
• Specification: 21900kg
• Trademark: Caterpillar
• Origin: China
• Production Capacity: 50 Units/Month

Product Description

HIGH PERFORMANCE WITH LOWER FUEL CONSUMPTION

• Use up to 20% less fuel than the 320F excavators.
• Match the excavator to the job using power modes including new Smart Mode that automatically matches engine and hydraulic power to digging conditions.
• The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
• Your joystick commands adjust pump flow based on valve priority putting hydraulic pressure and flow where it needs to go giving you improved fast light-to-medium load cycle times.
• The electronically controlled, turbocharged engine meets U.S. EPA Tier 4 Final and EU Stage IV emissions standards using a transparent aftertreatment system that requires no operator input or downtime.
• Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
• Don't let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 125 º F (52º C) and cold start capability of 0º F (-18º C). An optional -25º F (-32º C) cold start package is available .
• Work up to 9,480 feet (3000 meters) above sea level without de-rating.
• Track your performance through standard Product Link that provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes and other machine data on demand through VisionLink ® online interface.

RELIABLE, HIGH AND LOW, HEAT AND COLD

• Work up to 3000 m (9,840 ft) above sea level without de-rating.
• Standard high-ambient temperature capability is 52º C (125º F) with cold start capability at -32º C (-25º F). 
• Auto warm up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
• Three levels of fuel filtration protect the engine from dirty diesel fuel.
• Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
• The center track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
• The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

WORK IN COMFORT IN THE ALL-NEW CAB

• The Comfort cab has a wide seat that adjusts for operators of all sizes. • Control the excavator comfortably with easy-to-reach controls all located in front of you.
• Standard automatic climate control keeps you at the right temperature all shift long.
• Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
• Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
• Use the standard radio's USB ports and Bluetooth® technology to connect to personal devices.

SIMPLE TO OPERATE

• Start the engine with a push button; use a Bluetooth key fob, smartphone app, or the unique Operator ID function.
• Program each joystick button, including response and pattern, using Operator ID; it will also remember climate control fan and radio settings.
• Navigate quickly on the standard high-resolution 203 mm (8 in) touchscreen monitor or with the aid of the jog dial control.
• Not sure how a function works or how to maintain the excavator? Always have the operator's manual at your fingertips in the touchscreen monitor.

MAINTENANCE

• Expect up to 15 percent less maintenance cost than the 320E. (Savings calculated over 12,000 machine hours.)
• Do all daily maintenance at ground level.
• Check engine oil level quickly and safely with the new ground-level engine oil dipstick; fill and check engine oil on top of the machine with a conveniently located second dipstick.
• Track your excavator's filter life and maintenance intervals via the in-cab monitor.
• Do no required maintenance on the Cat Clean Emissions Module.
• Change all fuel filters at a synchronized 500 hours.
• Expect the new air intake filter with pre-cleaner to last up to 1,000 hours - a 100 percent increase over the previous filter.
• The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval - 50 percent longer than previous filter designs.
• The new high-effi ciency electric cooling fans only run when needed and reverse to keep cores free from debris.
• S·O·SSM ports simplify maintenance and allow for quick, easy extraction of samples for fluid analysis.

SAFETY

• Access 100 percent of daily maintenance points from ground level - no need for you to climb on top of the excavator.
• Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.
• The standard ROPS cab meets ISO 12117-2:2008 requirements.
• Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
• A rearview camera is standard, and a right-side-view camera is optional.
• The new right-hand service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
• The handrails comply with ISO 2867:2011 requirements.
• The lower frame meets ISO 15818:2017 lifting and tie-down requirements.

EXCAVATOR ATTACHMENTS
From hammers to pulverizers, our attachments help you take on more jobs with your Cat Excavator.

Engine Model	Cat C4.4 ACERT
Net Flywheel Power	90.0 kW
Bore	105.0 mm
Stroke	127.0 mm
Displacement	4.4 l
Gross Power - SAE J1995	91.0 kW
Net Power - SAE J1349	90.0 HP
Engine RPM - Operation	1700.0 r/min
Engine RPM - Travel	2000.0 r/min

WEIGHTS

Note (1)	Standard Undercarriage, Reach Boom, R 2.9 (9'6")Stick, HD 1.0 m3 (1.31yd3 ) bucket and 790mm(31 ") TG shoes, Counterweight (4.2mt / 9,260lb)
Operating Weight - North America	21900.0 kg
Note (2)	Standard Undercarriage, Reach Boom, R 2.9 (9'6")Stick, HD 1.0 m3 (1.31yd3 ) bucket and 700mm(28 ") TG shoes, Counterweight (4.2mt / 9,260lb)
Operating Weight - Europe	21300.0 kg

SERVICE REFILL CAPACITIES

Fuel Tank Capacity	345.0 l
Cooling System	25.0 l
Engine Oil	15.0 l
Final Drive - Each	5.0 l
Hydraulic System - Including Tank	234.0 l
Hydraulic Tank	115.0 l
DEF Tank	39.0 l
Swing Drive - Each	5.0 l

SWING

Maximum Swing Torque	74.0
Swing Speed	11.6 r/min

DRIVE

Maximum Drawbar Pull	205.0 kN
Maximum Travel Speed	5.9 km/h
Maximum Gradeability	35°--70%

HYDRAULIC SYSTEM

Main System - Maximum Flow - Total	442.0 l/min
Maximum Pressure - Equipment - Normal	35000.0 kPa
Maximum Pressure - Swing	26800.0 kPa
Maximum Pressure - Travel	34300.0 kPa

WORKING RANGES - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK

Bucket Digging Force (ISO)	129.0 kN
Bucket Digging Force (SAE)	115.0 kN
Stick Digging Force (ISO)	99.0 kN
Stick Digging Force (SAE)	96.0 kN
Maximum Cutting Height	9450.0 mm
Maximum Depth Cut for 2440 mm (8'0") Level Bottom	6550.0 mm
Maximum Digging Depth	6720.0 mm
Maximum Loading Height	6490.0 mm
Maximum Reach - Ground Level	9860.0 mm
Maximum Vertical Wall Digging Depth	5690.0 mm
Minimum Loading Height	2170.0 mm

DIMENSIONS - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK

Counterweight Clearance	1050.0 mm
Note	With HD 1.0m3 bucket and 790 mm shoes.
Shipping Height	2960.0 mm
Shipping Length	9530.0 mm
Track Gauge	2200.0 mm
Track Length - Center of Rollers	3270.0 mm
Transport Width - 790 mm (31 in) Shoes	3170.0 mm

DIMENSIONS - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK

Ground Clearance	470.0 mm
Tail Swing Radius	2830.0 mm