CAT 950L wheel loader CAT Loader
Benefits & Features:
RELIABILITY
- Cat® C7.1 ACERT™ engine offers a combination of proven electronic, fuel, and air systems.
- Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
DURABILITY
- Tough countershaft powershift transmission and axles handle extreme applications.
- Improved hydraulic hose routing reduces potential hose wear.
- Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.
PRODUCTIVITY
- Engine power increased by approximately 22% improves machine performance and response (compared to H Series).
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
- High capacity torque converter results in greater digging efficiency.
- Z-bar linkage provides high breakout force at ground level.
- Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
- Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
- Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.
FUEL EFFICIENCY
- Up to 10% lower fuel consumption than H Series.*
- Power dense ACERT engine burns less fuel by providing power and torque when needed.
- Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
- Load sensing hydraulics result in proportional flow for implement and steering on demand.
- Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
*Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
EASE OF OPERATION
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
- Intuitive, ergonomic controls keep operators focused on their work.
- Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.
SAFETY
- Excellent cab access with wide door and stair-like steps.
- Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
- Robust, repositioned grab bars provide safe access to platforms.
SERVICEABILITY
- One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
- Safe ground level access to fuel fill, oil fill, filters and daily maintenance points means less servicing time required.
- Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.
CAT CONNECT TECHNOLOGY
- Monitor, manage and enhance job site operations.
- Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
- Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
- Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
2. Specifications:
ENGINE
| Net Power - ISO 9249 |
185.0 kW |
| Engine Model |
Cat C7.1 ACERT |
| Displacement |
7.01 l |
| Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric |
195 kW (265 hp) |
| Maximum Net Power - 2,000 rpm - ISO 9249 - Metric |
185 kW (252 hp) |
| Peak Gross Torque - 1,400 rpm - ISO 14396 |
1050.0 N·m |
| Maximum Net Torque - 1,400 rpm |
984.0 N·m |
WEIGHTS
| Operating Weight |
18136.0 kg |
| Note |
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppr |
BUCKETS
| Bucket Capacities |
2.7-4.4 m? (3.5-5.8 yd3) |
OPERATING SPECIFICATIONS
| Breakout Force |
152.0 kN |
| Static Tipping Load - Full 40° Turn - No Tire Deflection |
11624.0 kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection |
10926.0 kg |
| Note (1) |
For a machine configuration as defined under ?Weight.? |
| Note (2) |
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
TRANSMISSION
| Forward - 1 |
6.9 km/h |
| Forward - 2 |
12.0 km/h |
| Forward - 3 |
19.3 km/h |
| Forward - 4 |
25.7 km/h |
| Reverse - 1 |
6.9 km/h |
| Reverse - 2 |
12.0 km/h |
| Reverse - 3 |
25.7 km/h |
| Forward - 5 |
39.5 km/h |
| Note |
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius. |
HYDRAULIC SYSTEM
| Hydraulic Cycle Time - Total |
9.5 s |
| Implement Pump Type |
Variable Axial Piston |
| Implement System - Maximum Operating Pressure |
27900.0 kPa |
| Implement System - Maximum Pump Output at 2,340 rpm |
245.0 l/min |
SERVICE REFILL CAPACITIES
| Cooling System |
54.0 l |
| Crankcase |
20.0 l |
| Transmission |
43.0 l |
| Hydraulic Tank |
125.0 l |
| Differential - Final Drives - Front |
43.0 l |
| Differential - Final Drives - Rear |
43.0 l |
| Fuel Tank |
275.0 l |
SOUND
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) |
107.0 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) |
75 dB(A)* |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
72.0 dB(A) |
| Note (1) |
*Distance of 15 m, moving forward in second gear ratio. |
| Note (2) |
**For machines in countries that adopt the ?EU Directives.? |
| Note (3) |
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** |
104 LWA*** |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** |
69.0 dB(A) |
BUCKET CAPACITIES
| Bucket Range |
2.7-4.4 m? (3.5-5.8 yd3) |
DIMENSIONS - HIGH LIFT
| Centerline of Rear Axle to Edge of Counterweight |
2071.0 mm |
| Centerline of Rear Axle to Hitch |
1675.0 mm |
| Ground Clearance |
368.0 mm |
| Height - Top of Exhaust Pipe |
3415.0 mm |
| Height - Top of Hood |
2697.0 mm |
| Height - Top of ROPS |
3446.0 mm |
| Hinge Pin Height at Carry Height |
765.0 mm |
| Hinge Pin Height at Maximum Lift |
4490.0 mm |
| Lift Arm Clearance at Maximum Lift |
3794.0 mm |
| Maximum Width - Over Tires - Loaded |
2822.0 mm |
| Note |
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket |
7428.0 mm |
| Rack Back - Carry Height |
54 degrees |
| Rack Back - Maximum Lift |
66 degrees |
| Rack Back at Ground |
45 degrees |
| Tread Width |
2140.0 mm |
| Wheel Base |
3350.0 mm |
DIMENSIONS - STANDARD LIFT
| Centerline of Rear Axle to Edge of Counterweight |
2083.0 mm |
| Centerline of Rear Axle to Hitch |
1675.0 mm |
| Ground Clearance |
368.0 mm |
| Height - Top of Exhaust Pipe |
3415.0 mm |
| Height - Top of Hood |
2697.0 mm |
| Height - Top of ROPS |
3446.0 mm |
| Hinge Pin Height at Carry Height |
663.0 mm |
| Hinge Pin Height at Maximum Lift |
3995.0 mm |
| Lift Arm Clearance at Maximum Lift |
3410.0 mm |
| Maximum Width - Over Tires - Loaded |
2822.0 mm |
| Note |
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket |
6939.0 mm |
| Rack Back - Carry Height |
49 degrees |
| Rack Back - Maximum Lift |
60 degrees |
| Rack Back at Ground |
41 degrees |
| Tread Width |
2140.0 mm |
| Wheel Base |
3350.0 mm |
){kind=link}