| Customization: | Available |
|---|---|
| Certification: | TUV, ISO, ISO9001: 2000 |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Overall Dimension | 1 Length(with bucket on ground) 7085(mm) |
| 2 Width 2313(mm) | 3 Load Bucket width 2313(mm) |
| 4 Height(To the top of the cab) 2710 (mm) | 5 Height(To the top of the digging pole) 3424 (mm) |
| 6 Wheelbase 2155.5(mm) | 7 Back wheel Tread 1700(mm) |
| 8 Fore wheel Tread 1880(mm) | 9 Min. ground clearance 355(mm) for 2WD 275(mm) for 4WD |
| Main Loading Technical Specification | 1 Rated load 1700(Kg) |
| 2 Operating weight 7600KG | 3 Max lifting capability>2500KG |
| 4 Rated load bucket capacity 1.0(m3) | 5 Max. load breakout force >60kN |
| 6 Max. dump clearance 2714(mm) | 7 Max. Dump reach 845(mm) |
| 8 Dump angle at any position ≥43.5° | 9 Min. turning radius |
| (1) Outside of bucket 5280(mm) for 2WD 5670(mm) for 4WD | (2) Center of front wheel3795 (mm) for 2WD 4380(mm) for 4WD |
| 10 Lifting time of loading bucket ≤4.5(sec.) | 11 Lowering time of loading bucket ≤7.5(sec.) |
| 12 Dumping time ≤1.5(sec.) | 13 Traveling speed(Km/h),4 forward and 4 reverse |
| (1) gear forward 6 | (2)gear forward 9.6 |
| (3) gear forward 20.5 | (4) gear forward 38 |
| (1) gear reverse 6.0 | (2) gear reverse 9.6 |
| (3) gear reverse 20.5 | (4) gear reverse 38 |
| Main Digging Technical Specification | 1 Rated digging bucket capacity 0.3(m3) |
| 2 Max. digging depth 4405(mm) | 3 Max. digging force>50±10%kN |
| 4 Max. digging radius 5481(mm) | 5 Max. dumping height 3737(mm) |
| Diesel engine | 1 Model WD WP4G95E221 |
| 2 Type Direct injection. Turbocharged. Water cooling | |
| 3 Rated output 70 (kW) | 4 Total exhaust of cylinder4.5(L) |
| 5 Inter-bore of cylinder/stroke102/130(mm) | 6 Voltage of starting motor 12(V) |
| 7 Rated speed2200(r/min) | 8 Max. Torque 380(N.M) |
| 9 Starting type Electric | 10 Min. specific fuel consumption216(g/Kw.h) |
| Transmission System | 1. Torque Converter |
| 1 Model CARRARO | 2 Cooling type Pressure oil circulating |
| 2. Transmission case | 1 Model CARRARO |
| 2 Type Synchromesh mechanical shift | 3 Gear shift posit 4 Forward and 4 reverse gears |
| 3. Axle and Tire | 1 Model CARRARO |
| 2 Type of main reducer spiral bevel gear, single stage | 3 Type of final reducer Single stage planetary |
| 4 Max. steering angle 55° | 5 Tire type 4WD fore tire12-16.5NHS-10PR |
| 2WD fore tire11L-16F3-12PR | Rear tire 19.5L-24R4-12PR |
| Working Device Hydraulic System | 1 Model of oil pump JHP2063C |
| 2 System pressure 210(kgf/cm2) | 3 Model of load valve ZL20.3S4C-00 |
| 4 Model of excavate valve WJ20.7SC3-00 | Steering System |
| 1 Type Fore wheel Steering | 2 Model of steering pump JHP2063C |
| 3 Model of Redirector BZZ5-E160B+ FKB-3022 | 4 System pressure 140(kgf/cm2) |
| Oil Capacity | 1 Fuel(diesel) 151(L) |
| 2 Engine lubricating oil 11(L) | 3 Oil for converter and gear boxFor 2WD 18.5(L) |
| For 4WD 21(L) | 4 Oil for hydraulic system 110(L) |
){kind=link}