Official Manufacturer Gr300 Motor Grader
1. Designing with new appearance.
2. Being in articulated frame, with front-wheel steering, so ensuring small turning radius and more maneuverability.
3. CUMMINS(Tier3),Application of CUMMINS electrospray diesel engine,low noise,low emission.
4. Hydraulic system with load sensing.
5. Electron checking and third level failure warning system
6. Wet brake driving axle, double circuit brake
7. 6,3. Powershift(electric hydraulic) countershaft design with six forward and three reverse speeds.
8. NO-SPIN.The rear axle is of three-stage driving axle equipped with No-Spin differential locking device.
9.e equipped with internationally purchased hydraulic components, so ensuring reliable performance.
10. With friction-protecting worm-gear case,ball turn table gyratory device has reliable performance and long lifetime.
11.The ABS adjustable control panel, seat, control joysticks and instruments are rationally laid out, which are featured in easy reach and comfortable operation.
12.The operation cab is very nice in out-looking, with over-head air conditioner, wide vision and proper sealing.
|Rated power/speed|| 224kW/2100rpm|
|Travelling speed ,forward||5,8,11,19,23,40 km/h|
|Travelling speed ,reverse||5,11,23 km/h|
|Tire inflation pressure||350 kPa|
|Working hydraulic pressure||16 MPa|
|Max. steering angle of front wheels||±50°|
|Max. lean angle of front wheels||±17°|
|Max. oscillation angle of front axle||±15°|
|Max. oscillation angle of balance box||15|
|Frame articulation angle||±27°|
|Min. turning radius using articulation||8.0m|
|Maximum lift above ground||450mm|
|Maximum depth of cutting||500mm|
|Maximum blade position angle||90°|
|Blade cutting angle||28°-70°|
|Circle reversing rotation||360°|
|Moldboard width X height||4920×787mm|
|Contact person: Betty |
|Wsap/Tel/Wecht:+86 182 2104 5926|
|Facebook: https://facebook.com/oriemac |