Customization: | Available |
---|---|
Transmission Type: | Manual |
Power: | Diesel |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
model | 7038KK | ||||
driving model | 6×4 | ||||
(Kg) gross weight | 70000 | ||||
(Kg) curb weight | 28500 | ||||
(Kg)load capacity | 41500 | ||||
(Kg)Front\rear axle load capacity | 25000/40000/40000 | ||||
exterior dimension | 8630X3600X3950 | ||||
(mm) wheelbase | 3775+1700 | ||||
(mm) threadbase | 2866/2690 | ||||
(mm) front/rear suspension | 1590/1535 | ||||
(Km/h)top speed | 42 | ||||
max. slope climbing capacity | 30% | ||||
(m) turnning diameter | ≤23 | ||||
approching angle | ≥30° | ||||
departure angle | ≥40° | ||||
(mm) min.ground clearance | 330 | ||||
engine | model | WD12.375 | |||
type | water-cooled,6 cylinders in line,tubocharge,intercool | ||||
stroke x broe | 126×155 | ||||
displacement | 11.596 | ||||
(KW/r.p.m)rated power | 276/2200 | ||||
(N.m/r.p.m)max. torque | 1500/1300-1600 | ||||
clutch | double400 | ||||
gearbox | model | 9JSD.220, Manual ,mechanical gearbox,9 forward gear,1 reverse gear | |||
(N.m)permission input torque | 2200 | ||||
tranmission ratio | forward gear12.44; 8.31; 6.09; 4.54; 3.36; 2.47; 1.81; 1.35; 1.00; reverse gear 12.99 | ||||
axle | front axle(25T),middle and rear axle ratio12.95(BEIBEN40T) | ||||
steering system | ZJ130.C,Hydralic boosting steering,whole circulation in ball type | ||||
brake system | double circulation air brake,three sets of braking system | ||||
service brake-contrallable double circulation foot brake | |||||
parking brake- hand controlled blow-down springs brake | |||||
engine exhaust brake | |||||
frame | Double-layer composite,the same width 1020mm frame,dimension of section 320x90x8+8(mm), Full- wide straight frame with section of 330 x 80 x 16(8+8)mm, All frame and cabin were stamped by large-scale precision hydraulic press for the one-time molding. | ||||
front suspension | The longitudinal lay-out style of 13 parabolic leaf-springs, shock absorb | ||||
rear suspension | 13 parabolic leaf springs with no-independent style balance suspension | ||||
cabin | Offset cabin, Full steel skeleton structure, covered with double layer steel plate, can be tipped forwardly, with air suspension seat for driver. Fully-integrated structure instrument panel , Internal A/C, Radio ,MP3 Player, air horn, sun visor, rear mirror, wiper, gauges (with color indication for safe and unsafe working), monitoring and working signals are conveniently,located within easy reach of the operator. | ||||
electronics systme | storage battery | 2×165Ah | |||
generator | 1500W,28V×55A | ||||
starter | 5.4KW | ||||
rated voltage | 24V | ||||
audio device | MP3(SD/USB) | ||||
Dumper body | front lifting body,body dimension5.6x2.9x1.6m,bottom steel thinkness 14mm with 5 longitudinal frame,edge steel thinkness10mm(material 16Mn),upright front steel with 10mm rear door. 8mm thinkness frame on rear door.four wrap angle,upside and downside hinge,H.YVA 172pump | ||||
A/C | heat from engine coolant system | ||||
Inner A/C | |||||
tyre | 14.00-24 | ||||
fuel tanker | 400L |