LIUGONG Hot Selling Grader CLG4215 215HP
| Engine |
|
DCEC 6CTAA8.3-C215 |
| Rated Power |
(kW) |
160(215)@2200 |
| Blade Width |
mm(inches) |
3960(156) |
| Maximum Speed |
km/h (mph) |
40.3 (25) |
| Draw Bar Pull |
(kN) |
86 |
| Operating Weight |
kg(Lb) |
16500(36376) |
| ENGINE |
| Tier |
|
II |
| Make |
|
Dongfeng Cummins |
| Gross Power |
kW(Hp)@rpm |
160(215)@2200 |
| Net Power |
kW(Hp)@rpm |
144(195)@2200 |
| Peak Torque |
|
908N.m/1500rpm |
| Torque Rise % |
|
31% |
| Number of Cylinders |
|
6 |
| Aspiration |
|
turbo air-to-air aftercooled |
| TRANSMISSION |
| Transmission Type |
|
power shift |
| Transmission Configuration |
|
6f/3r |
| Torque Converter |
|
three-member single turbine |
| Maximum Travel Speed, fwd |
(km/h) |
42 (25.8) |
| Maximum Travel Speed, rev |
(km/h) |
25.6 (15.9) |
| Number of Speeds, fwd |
|
6 |
| Number of Speeds, rev |
|
3 |
| AXLES |
| Front Axle Make |
|
LiuGong Weld axle |
| Rear Axle Make |
|
Meritor |
| Differential Type |
|
No-spin limited slip standard |
| Final Drive Type |
|
chain drive |
| Axle Oscillation |
|
±15° |
| Front Axle Type |
|
all welded steel frame |
| Front Axle, Wheel Lean Angle |
|
±17° |
| STEERING |
| Steering Configuration |
|
load sensor steering gear |
| Steering Relief Pressure |
(Mpa) |
17 |
| Minimum Turning Radius |
(inches) |
8000(315) |
| Steering Angle |
|
±45° |
| Frame Articulation Angle |
|
±20° |
| BRAKES |
| Service Brake Type |
|
(Dry)shoe |
| Service Brake Location |
|
rear axle only |
| Service Brake Actuation |
|
hydraumatic |
| TIRES |
| Tire Size |
|
17.5-25 PR12/L3 |
| HYDRAULIC SYSTEM |
| Main Pump Type |
|
gear |
| Main Relief Pressure |
(Mpa) |
18 |
| Pilot Pump Flow |
L(Gal)/min |
126(33) |
| WORKING CAPACITIES |
| Maximum Draw Pull |
(kN) |
90 |
| Cutting Pressure |
kg(Lb) |
8100(17857) |
| TANDEM DRIVE PERFORMANCE |
| Height |
mm(inches) |
600(24) |
| Width |
mm(inches) |
210(8) |
| Thickness, inner wall / outer wall |
mm(inches) |
20/20(0.8/(0.8) |
| Center Distance |
mm(inches) |
1538(61) |
| Oscillating Angle |
|
±15° |
| MOLDBOARD PERFORMANCE |
| Bank Cut Angle |
|
40~70 |
| Moldboard Lift Above Ground |
mm(inches) |
405(16) |
| Moldboard Side Shift, right / left |
mm(inches) |
725/675(29/27) |
| Maximum Sloping Angle |
|
90° |
| Cutting Depth |
mm(inches) |
600(24) |
| Circle Rotation |
|
360° |
| Circle Diameter |
mm(inches) |
1455(57) |
| Circle Thickness |
mm(inches) |
140(6) |
| DIMENSIONS |
| Wheelbase |
mm(inches) |
6230(245) |
| Overall Length |
mm(inches) |
8971(353) |
| Overall Height with Cab |
|
3438(135) |
| Overall Width |
mm(inches) |
2600(102) |
| Clearance under Front Axle |
mm(inches) |
645(25) |
| Moldboard Standard Length |
mm(inches) |
4270(168) |
| Moldboard Standard Thickness |
mm(inches) |
19(0.7) |
| Moldboard Standard Height |
mm(inches) |
650(24) |
| OPERATING WEIGHTS |
| Operating Weight |
kg(Lb) |
16500(36376) |
| On Front Wheels |
kg(Lb) |
4700(10362) |
| On Rear Wheels |
kg(Lb) |
11800(26015) |
| SERVICE CAPACITIES |
| Fuel Tank |
L(Gal) |
230(61) |
| Engine Oil |
L(Gal) |
22(6) |
| Cooling System |
L(Gal) |
45(12) |
| Hydraulic Reservoir |
L(Gal) |
186(49) |
| Transmission And Torque Converter |
L(Gal) |
45(12) |
| Tandems, Each |
L(Gal) |
28(7) |
Contact:
Betty Ding
Shanghai Oriemac Machinery & Equipment Co., Ltd.
Oriemac International Holding Limited
Add: Suite 2808, Super Ocean Finance Center, 2067 West Yan'an Road, Shanghai 200336, China
Web: oriemac.en.made-in-china.com
Alibaba: https://oriemac.en.made-in-china.com
Made-in-China: http://oriemac.en.made-in-china.com
Global sources: http://oriemac.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}