| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Highlight 1: Leading lifting and driving performances
1. Five main U-type booms. The boom length is 10.6m-41.0m with strong lifting performance, leading ahead of products with the same tonnages in the same industry.
2. The new power system platform centers on 9L high-power engine of Shanghai Diesel Engine Co., Ltd, 9-gear overgear gearbox of Shanxi Gear Auto Drive Group Co., Ltd and large-ration double reduction axes of Meritor Axle Co., Ltd. It is of superior driving performances and the maximum gradeability reaches to 41%.
Highlight 2: Double-pump confluence technique, the working performance of amplitude of luffing and flexibility have been promoted by 30%
1. In addition to winch, confluence of telescopic extension and amplitude of luffing can be also achieved by the new main confluence valve that significantly improves work efficiency of products.
Highlight 3: New-structure special hydraulic-pressure radiator with high reliability under high temperature conditions
1. New-structure special hydraulic-pressure radiator, the radiator power (18KW) would be increased and heat dispersion performance would be promoted by 15%;
2. The layout of fuel hole position is reasonable and speed of hydraulic oil is uniform. The pressure loss is lowered by 33%, guaranteeing heat dispersion performance of products. Meanwhile, the reliability of continuous operation under high temperature conditions would be substantially promoted.
Highlight 4: New molding, humanized design and comfortable manipulation
1. New operating house, wheel house and machine shed. Novel appearances, fine lines of the complete machine appearance that shows international trends;
2. The rearview mirror is installed in operating house, easy to for observe the working environment; front pedal and push-and-pull pedal in left side are installed, easy access to the operating house;
3. Ladder stand is installed in two sides of the chassis, easy to get on or off the bus. In addition, tool cabinet is installed in right rear side of the frame, easy to store tools attachment for users, fully representing the purpose of humanized design.
| Main Technical Parameter Table under Driving Status | ||||
| Category | Item | Unit | Parameter | |
| Dimension Parameter | Overall length | mm | 12680 | |
| Overall width | mm | 2500 | ||
| Overall height | mm | 3400 | ||
| Wheel base | mm | 4425+1350 | ||
| Wheel track | mm | 2074/1834/1834 | ||
| Weight Parameter | Total mass under driving status | kg | 32800 | |
| Axle load | Front axle | kg | 7300 | |
| Back axle | kg | 25500 | ||
| Kinetic Parameter | Engine type | SC9DF290Q4 | ||
| Engine power rating | kw/(r/min) | 213/2200 | ||
| Rated torque of engine | N.m/(r/min) | 1200/1400 | ||
| Running Parameter | Maximum travel speed | km/h | 90 | |
| Minimum diameter of turning circle | m | 22 | ||
| Minimum ground clearance | mm | 275 | ||
| Approach angle | ° | 11 | ||
| Departure angle | ° | 12 | ||
| Braking length (the speed is 30km/h) | m | ≤10 | ||
| Maximum gradeability | % | 41 | ||
| Fuel consumption per hundred kilometers | L | ≤32 | ||
| Noise Parameter | Car exterior noise when speeding up | dB(A) | 88 | |
| Noise around the driver’s ear | dB(A) | 90 | ||
| Main Technical Parameter Table under Crane Operating Status | ||||||
| Category | Item | Unit | Parameter | |||
|
Main performance parameter |
Maximum rated total suspended load | t | 25 | |||
| Minimum rated range | m | 3 | ||||
| Turning radius of rotary table | mm | 3255 | ||||
| Maximum load moment | Base boom | kN.m | 1061 | |||
| Full-extend boom | kN.m | 596 | ||||
| Full-extend boom+ jib | kN.m | 467 | ||||
| Outrigger span | Length wise direction | m | 5.3 | |||
| landscape orientation | m | 6 | ||||
| Lifting height | Base boom | m | 10.9 | |||
| Full-extend boom | m | 41.5 | ||||
| Full-extend boom+ jib | m | 48.5 | ||||
| Boom length | Base boom | m | 10.6 | |||
| Full-extend boom | m | 41 | ||||
| Full-extend boom+ jib | m | 49.3 | ||||
| Offset angle of jib | ° | 0,15,30 | ||||
|
Working speed parameter |
Time of boom derricking | Rise boom | s | 38 | ||
| Boom telescopic time | Fully extended | s | 78 | |||
| Maximum turning speed | m/min | 2.5 | ||||
|
Contraction time of landing leg |
Horizontal landing leg | Stretching at the same time | s | 35 | ||
| Shortening at the same time | s | 30 | ||||
| Vertical landing leg | Stretching at the same time | s | 40 | |||
| Shortening at the same time | s | 35 | ||||
|
Lifting speed (single rope) |
Main lifting structure | Full load | m/min | 75 | ||
| Empty load | m/min | 135 | ||||
| Auxiliary lifting structure | Full load | m/min | 75 | |||
| Empty load | m/min | 135 | ||||
| Radiation outside the machine | dB(A) | ≤122 | ||||
| Within the operating house | dB(A) | ≤90 | ||||
){kind=link}