Xuzhou Factory New Road Grader 160HP Gr1605 Motor Graders with Ripper

• Warranty: 1 Year
• Certification: ISO, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Walking Mode: Wheeled
• Model NO.: GR1605
• Type: Small Grader
• Engine Model: Qsb5.9
• Rated Power/Speed: 125kw/2200rpm
• Overall Dimension (Standard): 8711*2483*3385mm
• Total Weight (Standard): 12500 Kg
• Ground Clearance (Front Axle): 586mm
• Forward Velocity: 5,8,13,18,30,47km/H
• Reverse Speed: 5,13,30km/H
• Maximum Lift Height: 410mm
• Transport Package: Nude
• Specification: 261kw
• Trademark: Oriemac
• Origin: Jiangsu China
• HS Code: 84292090
• Production Capacity: 1000 Units Per Month

Product Description

Xuzhou Factory 160HP GR1605 Motor Graders with Ripper

Product description
 

GR1605 is mainly used for large ground surface leveling, ditching, slope scraping, bulldozing, scarifying, snow removing and other work in highway, airport and farmland. The grader is necessary engineering machinery for national defense construction, mine construction, urban and rural road construction, water conservancy construction and farmland improvement, etc.

 

* Large output torque and power reserve coefficient and low oil consumption. Engine variable power control technology makes the machine work under the best fuel consumption area, more energy efficient. 

* Torque converter has big torque ratio, high efficiency and wide high efficiency area. Better combined work characteristics can be achieved when the torque converter is matched with engine. Transmission has 6 forward gears and 3 reverse gears. It has neutral start protection function. 

* Gears will be easily shifted by electrohydraulic control. During gear shift process, there is no impact, speed ratio distribution is reasonable, and various work requirements can be satisfied. 

* The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential. 

* The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius. 

* The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

Parameter

Item			GR1605
Basic parameters	Engine model		QSB5.9
	Rated power/speed		125kW/2200rpm
	Overall dimension (standard)		8711*2483*3385mm
	Total weight (standard)		12500 kg
	Tire specification		14.00-24
	Ground clearance (front axle)		586mm
	Tread		2113mm
	Space of front and rear axles		6279 mm
	Space of middle and rear wheels		1568 mm
Performance parameter	Forward velocity		5,8,13,18,30,47km/h
	Reverse speed		5,13,30km/h
	Tractive effort f=0.75		≥70 kN
	Maximum gradeability		≥25%
	Tire inflation pressure		260kPa
	Working system pressure		22MPa
	Transmission pressure		1.3-1.8Mpa
	Maximum steering angle of front wheel		±48°
	Maximum slant angle of front wheel		±18°
	Maximum oscillating angle of front axle		±16°
	Maximum oscillating angle of equilibrium box		±15°
	Maximum steering angle of frame		±20°
	Minimum turning radius		7.2m
	blade	Maximum lift height	410mm
		Maximum cutting depth	715mm
		Maximum tilt angle	90°
		Cutting angle	29°-69°
		Angle of revolution	360°
		Length & chord height	3965*610mm
Oil filling amount	Coolant		50L
	Fuel tank		380L
	Engine		24L
	Transmission		38L
	Equilibrium box		60L
	Coolant		36L
	Hydraulic oil		170L