Customization: | Available |
---|---|
Type: | Universal Type |
Transmission: | Hydraulic Transmission |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item | Specifications | ||
Engine | Model | SC11CB240,1G2B1 | |
Type | Water cooling,4xstrokes | ||
Air breathing | Thrbo-changed | ||
Number of cylinders | 6 | ||
Bore | 120mm | ||
Piston dispiacement | 10.5l | ||
Governor | Electronic variable-speed governor | ||
Power | 175kw(240hp) | ||
Rated speed | 2200rpm | ||
Fuel system | Direct injection | ||
Maximum torque | 950Nm/1400rpm | ||
Lubrication system | Gear pump forced lubrication | ||
Filter | Full-flow type 1 | ||
Air filter | Dry(double filter elements with dust exhanst and indicator) |
||
Gearbox | Hydraulic torque converter | type | Single stage,single phase,three-components |
types | Fixed shaft drive shifting | ||
km/h(Galculated on the tire 29.5R25) | |||
Gear 1(Forward/Rearward) 6/6 | |||
Gearbox | Gear 2(Forward/Rearward) 11/11 | ||
Travel speed | Gear 3(Forward/Rearward) 22/22 | ||
Gear 4(Forward/Rearward) 34/34 | |||
Axle and main drive | Drive system | 4 WD | |
Front wheels | Fixed | ||
Rear wheels | Oscillating axle,±12º swing | ||
Reduction gear | Spiral bevel gear | ||
Differential gear | Common gear | ||
Final drive | Planetary gear,1st class speed reduction |
||
Brake | Service brake | Gas cap oil disc brake(4W) | |
Parking brake | Drum type brake | ||
Emergency brake | With parking brake as dual purpose |
Item | Specifications | ||
Steering control system | Type | Hinged joint,full hydraulic power steering |
|
Turning angle | 38º in two directions | ||
Minimum turning radius (Calculated as the center of outward wheel) |
6063mm | ||
Hydraulic system | Steering system | Hydraulic pump | Gear pump |
Maximum flow | 168L/min | ||
Safety valve pressure setting | 16MPa | ||
Steering cylinder | Type | Dual-action piston | |
Number of cylinders | 2 | ||
Bore x stroke | 90mm×442mm | ||
Loading control | Hydraulic pump | Gear pump | |
Rated flow | 380 L/min | ||
Safety valve pressure setting | 20MPa | ||
Working cylinder | Type | Dual-action piston | |
Number of cylinders-bore x stroke | |||
Movable arm | 2-170 mm×828mm | ||
Rotating bucket | 1-200 mm×593mm | ||
Control valve | Single handle | ||
Control position | Movcble arm | Lifting,holding,lowering and fioating |
|
Rotating bucket | Tilting bsck,holding and duping |
||
Working time of cylinder | Lifting | ≤6.0S | |
Dumping | <0.9S | ||
Lowering(empty bucket) | 4s | ||
Refilling capacity | Cooling system | 65L | |
Fuel tank | 300L | ||
Engine | 28L | ||
Hydraulic system | 200L | ||
Drive axle(each) | 36(dry)/70(wet) | ||
Gearbox | 28L |
Standard movable arm | High unloading movable arm | |||
Standard bucket | Bucket | Standard bucket | Bucket | |
3.5m³ | 5.5m³ | 3.5m³ | 5.5m³ | |
Bucket capacity:Stack loading | 3.5 | 5.5 | 3 | 4.5 |
Flat loading | 3 | 4.5 | 3 | 4.5 |
Width of bucket | 3000 | 3500 | 3000 | 3500 |
Weight of bucket | 1540 | 2108 | 1540 | 2108 |
Maximum dumping height at 45° inclination | 3200 | 3180 | 3720 | 3700 |
Dumping distance at 45°inclination under maximum dumping height |
1268 | 1282 | 1340 | 1360 |
Lengths of bucket rod stretching-out and bucket extension | 4420 | 4450 | 4760 | 4790 |
Working height(height-rising) | 5640 | 5800 | 6180 | 6240 |
Total length | 8740 | 8600 | 9100 | 9000 |
Turning circumference | 7178 | 7340 | 7360 | 7510 |
(Distance from the transport position where the bucket is located to the lateral angle of bucket) |
||||
Digging depth:0° | 80 | 80 | 80 | 80 |
10° | 240 | 250 | 240 | 250 |
Item | Specifications | Unit |
Rated bucket capacity | 3.5 | m³ |
Rated operating load | 6000 | kg |
Operation mass | 20000 | kg |
Max.horse power | 171 | kN |
Max.breakout force | 201 | kN |
Hydraulic cycle time-raise | 6 | s |
Total cycling time | 10.9 | s |
Tire type | 23.5-25-20PR | |
Dimension(L×W×H) | 8740×3020×3550 | mm |