Customization: | Available |
---|---|
Transmission Type: | Manual |
Power: | Diesel |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Type:Germany Bosch technology and Wabco air | |||
compressor , Manufacture in CAMC | |||
Max. Power: | 250kw/1900 | ||
Max. T Qrgue: | 1570Nm/1250 | ||
No. of cylinder: | 6 | ||
Bore x Stroke: | 118mmx150mm | ||
Displacement: | 9.84L | ||
Controller type | Mech | ||
Emission level: | Euro 2 standard | ||
Model: | 8SDKy1981A | Service: | full air break |
Manufacture in camc with servo | |||
Type: | Mechanical(synchronize) dual ciruit | ||
1st | 12.07 | Parking: | Spring actuator |
2nd | 8.35 | at rear wheels | |
3rd | 5.67 | Auxiliary: engine break | |
4th | 4.07 | ||
5th | 2.96 | ||
6th | 2.05 | Rim: | 8.5-22.5 |
7th | 1.39 | Tires: | 11.00R20 |
8th | 1 | ||
Reverse | 11.24 | ||
Axles | |||
Front: | Stub axle with double T-cross section | ||
Capacity: 7,500kg | |||
Rear: | Dual reduction with hub reduction and final drive ratio:4.769 | ||
Fuel tank | |||
Mounted on offside of the frame | |||
Capacity: | 380L | ||
Material: | Al | ||
Steering | |||
Driving position: | Left and Right hand drive only | ||
Type: recirculation ball with integral power assisted by oil | |||
Suspension | |||
Front suspension: tapered leaf spring 9 semi-elliptic leaf spring | |||
Rear suspension: tapered leaf spring 12 semi-elliptic leaf spring | |||
clutch | |||
Type: | Hydraulic control with air assisted | ||
Plate diameter: | dry single plate with diaphragm outside diameter: 430 mm | ||
Hydraulic system: Front mounted | |||
Colour:White/Red/Yellow/Blue | |||
Overall dimension(L*W*H) | 8200*2500*3350 | ||
Deck dimension | 5400*2300*1500 | ||
Thickness DECK; Bottom 8mm/side 5mm | |||
Number of axle | 3 | ||
Tread (mm) | 2065/1860/1860 | ||
Wheelbase (mm) | 3600+1350 | ||
Min. ground clearance (mm) | 255 | ||
Crew | 3 | ||
Nominal payload | |||
Axle load: | Front: 7,500kg | ||
Rear: 2*16,000kg | |||
GVW | 25,000 | ||
Batteries: | 2*12 Volt - 150 AH*2 | ||
Alternator: | 24 Volt/70A | ||
Starter: | 24 Volt/7.80kw | ||
Max. speed(km/h): | 78 | ||
Type: | Parallel, tapered channel section type with | ||
Reinforcements, stiffeners and cross members | |||
Size (HxWxt): | 310*90(8+8) | ||
Width (front/rear): | 976/856 |