| Customization: | Available |
|---|---|
| Certification: | CE, ISO9001: 2000 |
| Condition: | New |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Overall Data | Steering System | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bucket Capacity (m 3 ) | 3 | Type | Hydraulic Load Sensor System | |||||||||||
| Rated Payload(kg) | 5000 | Cylinders-bore×Stroke(mm) | 2-100×324 | |||||||||||
| Operating Weight(kg) | 18020±300 | Steering Pump | Gear Pump | |||||||||||
| Traction Force(kN) | 155±3 | System Pressure(MPa) | 16 | |||||||||||
| Breakout Force(kN) | 170±3 | Flow Rate(L/min/rpm ) | 176/2200 | |||||||||||
| Travel speeds (km/h): | Steering Angle | ±35° | ||||||||||||
| I | II | III | IV | Hydraulic System | ||||||||||
| Forward | 6.8 | 13 | 23 | 36 | Lift Cylinders-bore×Stroke(mm) | 2-180×721 | ||||||||
| Reverse | 6.8 | 13 | 23 | Tilt Cylinder-bore×Stroke(mm) | 1-200×563 | |||||||||
| Engine | CUMMINS QSB6.7-C220 | Model of Working Pump | Gear Pump | |||||||||||
| Rated Power(kW/rpm) | 164/2200 | Flow Rate(L/min/rpm ) | 220/2200 | |||||||||||
| Peak Torque(Nm/rpm) | 949/1500 | System Pressure(MPa) | 16 | |||||||||||
| Starting Voltage(V) | 24 | Pilot Control System Pressure(MPa) | 2.5 | |||||||||||
| Drive Train | Hydraulic cycle time, rated load in bucket(in second): | |||||||||||||
| Torque Converter | Single-stage, Duo-turbine, 4-element | Raise(Loaded) | Dump | Lower(Empty) | Total | |||||||||
| Torque Ratio | 2.55 | 6 | 1 | 4 | 11 | |||||||||
| Transmission | Planetary Powershift Transmission | Electrical System | ||||||||||||
| Gear | 4F/3R | System Voltage(V) | 24 | |||||||||||
| Pressure of Transmission(MPa) | 1.6-1.8 | Battery (2 in series)(Ah) | 120 | |||||||||||
| Main Reducer | Spiral Bevel, 1-stage Reduction | Voltage(V) | 24 | |||||||||||
| Final Reducer | Planetary Reduction | Service Refill Capacity | ||||||||||||
| Tire | 23.5-25 L-3 16PR | Fuel Tank(L) | 285 | |||||||||||
| Brake System | Hydraulic Tank(L) | 285 | ||||||||||||
| Service Brake | Full Hydraulic Wet-discs Brake | Crankshaft(L) | 20 | |||||||||||
| SettingPressure(MPa) | 0.78 | Transmission(L) | 45 | |||||||||||
| Parking Brake | Hydraulic Actuated Drum Brake | Front Axle(L) /Rear Axle(L) | 28/28 | |||||||||||
| Emergency Brake | Hydraulic Actuated Drum Brake | |||||||||||||
| Air Conditioning System | ||||||||||||||
| Heating Capacity(W) | 5300(±10%) | |||||||||||||
| Cooling Capacity(W) | 4500(±10%) | |||||||||||||
){kind=link}