| Customization: | Available |
|---|---|
| Transmission Type: | Manual |
| Power: | Diesel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specification | |
| Chassis | |
| Parameter | |
| Overall dimension(mm) | 9800×2500×3500 |
| Kerb mass | 12500kg |
| Number of axle | 3 |
| Tread (mm) | 2,065/1,860/1,860 |
| Wheelbase (mm) | 1850+3370+1350 |
| Min.ground clearance (mm) | 255 |
| Crew | 2 |
| Payload | Front: 7500kg Rear: 16,000kg x2(Benz Technology Ratio:5.263) |
| Max. Speed (km/h) | 75 |
| Max. Grade ability (%) | 30 |
| Engine | |
| Model | CAMC CM6D18 385 31 |
| Type | Designed By AVL company,Germany technology, Boschand Wabco air compressor , Manufacture in camc |
| Max. Power | 283kw/1900 |
| Max. T Qrgue | 1760Nm/1,250 |
| No. of cylinder | 6 |
| Bore x Stroke | 118mmx150mm |
| Displacement | 9.84L |
| Controller type | MECH |
| Axles | |
| Front | Stub axle with double T-cross section Capacity: 7,500KG |
| Rear | 16T,Double reduction with hub reduction and final drive ratio: 5.263 |
| Capacity | 2×16,000KG(11.00R22.5 Steel tyre) |
| Brake system | |
| Service | Full Air Brake, Dual circuit |
| Parking | Spring actuator at rear wheels |
| Auxiliary | Exhaust brake |
| Fuel Tank (Mounted on offside of the frame) | |
| Capacity | 380L |
| Material | galvanized steel |
| Steering | |
| Driving position | Left or Right hand drive only |
| Type | Power steering |
| Suspension | |
| Front suspension | tapered leaf spring 9 semi-elliptic leaf spring |
| Rear suspension | tapered leaf spring 12 semi-elliptic leaf spring |
| Clutch | |
| Brand | Sachs or Valeo |
| Type | Hydraulic control with air assisted |
| Plate diameter | ry single plate with diaphragm 430 |
| Electrical System | |
| Batteries | 2*12 Volt - 150 AH*2 |
| Alternator | 24 Volt/70A |
| Starter | 24 Volt/7.80kw |
| Frame(mm) Type |
Parallel, tapered channel section type with Reinforcements, stiffeners and cross members |
| Size (HxW) | 310*90(8+8),double frame |
| Width (front/rear): | 976/856 |
| Upper | |
| Tipping type | Front tipping type |
| Tipping system | Complete set of Chinese famous brand hydraulics system |
| Dump Body Size(mm) | 7000X2300X1500 |
| Thickness |
Side:5mm in high tensile strength steel Q345/B(High strength Steel)
Side:5mm in high tensile strength steel Q345/BBottom:8mm in high tensile strength steel Q345/B |
){kind=link}