| Type: | Crawler Excavator |
|---|---|
| Usage: | Special Excavator, Marine Excavator, Mining Excavator, GM Excavator |
| Bucket: | Backhoe |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
| Bucket Capacity: | 0.5~1.0m³ |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Cummins high pressure common rail electronic injection engine features high power reserve and strong power.
The full set of Kawasaki negative-flow system features high stability and reliability and is the golden configuration among the products of same tonnage.
This machine features high system pressure, high flow, and fast motion response, with maximum digging force up to 105KN.
The comprehensively optimized working device and the cast shaft seats for boom and arm feature high strength, good wear resistance, and long life.
The two-sided support track rollers in place of carrier rollers, two one-sided track guides, and the reinforced X-frame are installed to adapt to severe working conditions.
The optional 0.65m3 rock bucket is designed specially for rock working condition.
Enhanced working device
The structures of critical portions are comprehensively optimized and the load-carrying positions are reinforced to resist against severe working conditions.
The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improve the durability of bucket.
Based on the digging path of the bucket, the bucket structure is optimized to reduce the digging resistance and improve the digging efficiency.
The H-shaped track frame features strong carrying capacity and reasonable machine load distribution. The track frame is equipped with standard boarding footplate to mitigate the user's labor strength and improve the user satisfaction.
| Comparative item | SE150 (Standard version) |
| Overall dimensions | |
| Overall length (mm) | 7860 |
| Ground length (During transport) (mm) | 4390 |
| Overall height (To the top of boom) (mm) | 2860 |
| Overall width (mm) | 2645 |
| Overall height (To top of cab) (mm) | 2855 |
| Ground clearance of counterweight (mm) | 915 |
| Minimum ground clearance (mm) | 425 |
| Tail turning radius (mm) | 2380 |
| Track length (mm) | 3645 |
| Track gauge (mm) | 2000 |
| Track width (mm) | 2500 |
| Standard track shoe width (mm) | 500 |
| Turntable width (mm) | 2645 |
| Distance from slewing center to tail (mm) | 2375 |
| Working range | |
| Maximum digging height (mm) | 8670 |
| Maximum dumping height (mm) | 6210 |
| Maximum digging depth (mm) | 5490 |
| Maximum vertical digging depth (mm) | 4625 |
| Maximum digging distance (mm) | 8325 |
| Maximum digging distance at ground level (mm) | 8195 |
| Working device minimum turning radius (mm) | 2395 |
| Maximum lifting height of bulldozer blade (mm) | - |
| Maximum digging depth of bulldozer blade (mm) | - |
| Engine | |
| Model | QSF3.8T (China-III) |
| Type | 4-cylinder, high pressure common rail, and water-cooled and turbocharged |
| Displacement (L) | 3.76 |
| Rated power (kW/rpm) | 86/2200 |
| Hydraulic system | |
| Type of hydraulic pump | Variable displacement duplex plunger pump |
| Rated working flow (L/min) | 2x130 |
| Bucket | |
| Bucket capacity (m³) | 0.65 |
| Swing system | |
| Maximum swing speed (r/min) | 11.3 |
| Brake type | Mechanically applied and pressure released |
| Digging force | |
| Bucket arm digging force (KN) | 70 |
| Bucket digging force (KN) | 97 |
| Operating weight and ground pressure | |
| Operating weight (kg) | 14500 |
| Ground pressure (kPa) | 43.8 |
| Traveling system | |
| Traveling motor | Axial variable displacement plunger motor |
| Traveling speed (km/h) | 3.25/5.2 |
| Traction force (KN) | 118 |
| Gradeability | 70%(35°) |
| Tank capacity | |
| Fuel tank capacity (L) | 220 |
| Cooling system (L) | 20 |
| Engine oil capacity (L) | 12 |
| Hydraulic oil tank/system capacity (L) | 177/205 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}