| Transmission Type: | Manual |
|---|---|
| Power: | Diesel |
| Load Capacity: | 61-70t |
| Emission Standard: | Euro 3 |
| Drive Wheel: | 6×4 |
| Engine Capacity: | ＞8L |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Specifications:
| model | 9038KK/9042KK | |||
| driving model | 6×4 | |||
| gross weight(Kg) | 90000 | |||
| curb weight(Kg) | 28500 | |||
| rated load capacity(Kg) | 61500 | |||
| Front\rear axle load capacity (Kg) | 25000/40000/40000 | |||
| exterior dimension(mm) | 8630X3600X3950 | |||
| wheelbase(mm) | 3775+1700 | |||
| threadbare(mm) | 2866/2690 | |||
| front/rear suspension(mm) | 1590/1535 | |||
| top speed(Km/h) | 42 | |||
| max. slope climbing capacity | 30% | |||
| turning diameter(m) | ≤23 | |||
| approaching angle | ≥30° | |||
| departure angle | ≥40° | |||
| min.ground clearance (mm) | 330 | |||
| engine | model | WD12.375/WD12.420 | ||
| type | water-cooled,6 cylinders in line,turbocharge,intercooler | |||
| stroke x broke | 126×155 | |||
| displacement(L) | 11.596 | |||
| rated power(KW/r.p.m) | 276/2200 309/2200 | |||
| max. torque(N.m/r.p.m) | 1750/1300-1600 | |||
| clutch | double 400 | |||
| gearbox | model | Manual, mechanical gearbox, 9 forward gear, 1 reverse gear | ||
| permission input torque(N.m) | 2200 | |||
| tranmission ratio | forward gear12.44; 8.31; 6.09; 4.54; 3.36; 2.47; 1.81; 1.35; 1.00; reverse gear 12.99 | |||
| axle | front axle(25T)middle and rear axle ratio12.95(BEIBEN 40T) | |||
| steering system | Hydraulic boosting steering, whole circulation in ball type | |||
| brake system | double circulation air brake, three sets of the braking system | |||
| service brake-controllable double circulation foot brake | ||||
| parking brake- hand controlled blow-down springs brake | ||||
| engine exhaust brake | ||||
| frame | Double-layer composite, the same width 1020mm frame, dimension of section 320x90x8+8(mm), Full- wide straight frame with a section of 330 x 80 x 16(8+8)mm, All frame and cabin were stamped by the large-scale precision hydraulic press for the one-time molding. | |||
| suspension | front suspension | The longitudinal lay-out style of 13 parabolic leaf-springs, shock absorbing | ||
| rear suspension | 13 parabolic leaf springs with no-independent style balance suspension | |||
| cab | Offset cabin, Full steel skeleton structure, covered with double layer steel plate, can be tipped forwardly, with air suspension seat for the driver. The fully-integrated structure instrument panel, Internal A/C, Radio, MP3 Player, air horn, sun visor, rear mirror, wiper, gauges (with a color indicator for safe and unsafe working), monitoring and working signals are convenient, located within easy reach of the operator. | |||
| electronics systems | storage battery | 2×165Ah | ||
| generator | 1500W,28V×55A | |||
| starter | 5.4KW | |||
| rated voltage | 24V | |||
| audio device | MP3(SD/USB) | |||
| Dumper body | front lifting body, body dimension5.6x2.9x1.6m, bottom steel thickness 14mm with 5 longitudinal frames, edge steel thinkness10mm(material 16Mn), upright front steel with 10mm rear door. 8mm thickness frame on the rear door.four wrap angle, upside and downside hinge, HYVA 172pump | |||
| A/C | the heat from the engine coolant | |||
| Inner A/C | ||||
| Tire | 13.00-25 | |||
| fuel tanker | 400L | |||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}