Mini 3ton Vibratory Road Roller Xmr303

• Type: Road Roller
• Working Method: Vibration
• Axle: Uniaxial Monowheel
• Grinding Wheel Type: Tire Grind
• Engine Type: Diesel Engine
• Certification: CE, ISO 9001:2000, ISO 9001:2008
• Model NO.: XMR303
• Condition: New
• Weight: 3 Ton
• Static Linear Load(N/Cm): 129/129
• Centrifugal Force(Kn): 32
• Vibrating Frequency(Hz): 60
• Transport Package: Nude
• Specification: 28.5kw
• Trademark: Oriemac
• Origin: Xuzhou China
• Production Capacity: 1000 Units Per Month

Product Description

Mini 3ton Vibratory Road Roller XMR303

Product description

XMR303 is a light vibratory roller with operating weight of 3 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.

* Closed hydraulic drive system is adopted to realize stepless speed change.

* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.

* The front vision of machine is less than 1 x 0.75 m, rear view without any shade, which provides drivers with a good sight range.

* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.

* High frequency vibration and excitation force design, high working efficiency, good compaction effect.

* Vibration drum width is larger than frame width, convenient to observe compac-tion condition of drum edge in the construction.

 

Parameter

Parameter	Unit	XMR303
Working weight	kg	3000
Static line load (front/rear)	N/cm	129/129
Vibration frequency	Hz	60
amplitude	mm	0.46
Exciting force	kN	32
Vibration wheel (diameter x width)	mm	746×1200
Theoretical climbing ability	%	30
Speed of work	km/h	0~ 9.5
Wheelbase	mm	1870
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius (inner) / (outside)	mm	2990 / 4190
Minimum ground clearance	mm	290
engine model		ZN390B
rated power	kW	28.5
Rated speed	r/min	2600