LONKING Digging Construction Machinery 30 Ton Hydraulic Digger Crawler Excavator CDM6306N
Construction Machinery CDM6306N features:
CDM6306N with strong, powerful and high quality engine and advanced negative flow control hydraulic system to achieve the best power matching and minimum cost and guarantee the optimum working efficiency.
CDM6235E is widely used for excavating, handling and finishing of earth or stones to meet the demand of construction sites, factory, municipal engineering and park objects. With the optional bucket, the material handling, surface finishing, ditch excavation and river course cleaning can be achieved, with the optional breaking hammer, the building demolition, road surface repair and rock breaking can be achieved. The structural members are subjected to the repeated analytical calculation to ensure the rigidity and strength which can cope with the rigorous working conditions.
Imported engine 6BTAA5.9-C
Imported engine high power, high torque and turbo-charging 6-cylinder direct injection engine guarantees the high reliability and durability. The charge air cooling system over the compressed air can enhance the oxygen content upon combustion markedly. The center fuel injection under high injection pressure allows the uniform atomizing of fuel, guarantees the normal combustion and reduces the exhaust gas emission.
Filtering System
The high efficiency dual element air filter ensures the quality of engine air intake. In addition, the air pre-filter can carry out the rough filtration over the air intake to enable the operation under the poor air quality working conditions and prolong the maintenance interval of the air filter. The oil-water separator and two-stage fuel filter will filtrate the fuel many times to ensure the quality of fuel fed to the engine.
Cooling System
The parallel radiator cooling makes cooling effect better and service easier.
Maintenance and Service
The easy maintenance of direct injection engine reduces the cost of maintenance. The global after service of engine enables the sharing of global resources. This will enhance the service efficiency, relieve the customers of worry about the service and ensure the attendance rate of excavator.
Specialist of Engine Management
The engine speed allows 10 adjustable gears through the throttle potentiometer and achieves the precise management over the engine speed through the control of engine throttle by the DC servo motor. The engine allows the auto idling/acceleration function to reduce the fuel consumption. It has a function of touch power enhancement, can handle the high resistance working condition with ease.
Control Mode
The dual pump two-circuit total power control system adopts the mature and reliable Europe and America technology to control the flow, the proportional solenoid valve regulates the two-stage pressure control of the main overflow valve.
Functions
This machine allows the functions of straight travel, boom/arm confluence, boom/arm holding, swing priority, swing anti-reversing and regeneration of arm cylinder. Each circuit without interference during composite action. Digging of arm and bucket as well as the lifting and swing of boom at the same time during operating, the operations of left and right motors are independent during traveling.
Auxiliary Hydraulic Valve
The main valve is provided with a set of standby valves to facilitate the installation of other accessories such as the breaking hammer.
Specifications:
Model |
|
CDM6306N |
General |
Operating weight( kg) |
34000 |
Standard bucket(m³) |
1.6 |
Bucket range(m³) |
1.6-2.2 |
Ground pressure(kPa) |
68 |
Travel speed(km/h) |
3.25/5.43 |
Swing speed (rpm) |
9.5 |
Gradeability |
35° (70%) |
Engine |
Model |
Cummins 6CTAA8.3-C (Euro II) |
Rated power(Kw(hp)/rpm) |
197(265)/1950 |
Displacement (L) |
8.3 |
Fuel tank(L) |
580 |
Hydraulic System |
Max.pressure of Implements(MPa) |
34.3 |
Max. flow of system( L/min) |
340x2 |
Hydraulic oil tank(L) |
470 |
Working Device |
Boom length(mm) |
6470 |
Arm length(mm) |
2900 |
Bucket radius(mm) |
1670 |
Digging Force |
Max. arm digging force (SAE/ISO)(kN) |
171/178 |
Max. bucket digging force (SAE/ISO)(kN) |
180/211 |
Standard Equipment |
The following equipment items are part of the whole standard equipment. In addition, the standard configuration
will change along with the product modification. For more information, contact the local LONKING agent. |
70 A alternator |
Aerial and harness (excluding radio speaker) |
Platform working lamp (1) |
Suspension type adjustable seat, |
Boom working lamps (2) |
Retractable seat belt (2" width) |
Refuelling pump |
Ash tray and cigar lighter |
Original Cummins engine |
Cup holder |
Radial seal air filter |
A/C system allowing fast defrosting |
Air prefilter |
Hydraulic safety lock joystick |
Oil-water separator |
Radio |
Fuel filter |
File pocket |
Rippled wall radiator with cleaning space |
Hat-and-coat hook |
High-volume fuel tank |
Interior lighting equipment |
Auxiliary hydraulic valve (1) |
Double stereo speaker |
Auto swing parking brake |
Openable skylight |
Boom/Arm holding control function |
Wiper and washer |
Counterweight |
Cab positive pressure filtration and ventilation system |
Top bonnet |
Rear window (escape exit) |
Gate lock and cover lock |
Escape hammer |
A/C stationary condenser |
Washable rubber floor mat |
Arm re-activation circuit |
Fire extinguisher |
Boom/Arm confluence |
Color graphic display |
Straight travelling hydraulic circuit |
Economic mode selection |
Double speed travel |
Date and time display |
Front idler and idler cushion |
Machine state display |
Trailer ring on base frame |
Working hour display, maintenance remind |
Chain guard rack |
Current engine speed display |
Adjustable seat armrest |
Warning message |
Transport Size
The following sizes approximate to that of the equipment of standard configuration.










