| Certification: | ISO, CE |
|---|---|
| Condition: | New |
| Rated Load: | 1-3t |
| Transmission: | Hydraulic |
| Load and Unload Mode: | Front Discharge |
| Walking Mode: | Wheeled |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Maximum Gross Power | 54.6 kW |
| Net Power | 55.3 kW |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
| Engine Model | Cat® C3.3B DIT* |
| Maximum Gross Power - ISO 14396 | 54.6 kW |
| Maximum Gross Power - ISO 14396 (DIN) | 55.0 kW |
| Maximum Gross Power - SAE J1995 | 55.0 kW |
| Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 | 55.3 kW |
| Rated Net Power - 2,400 rpm - SAE J1349 | 54.7 kW |
| Bore | 94.0 mm |
| Displacement | 3.3 l |
| Maximum Gross Torque - ISO 14396 | 261.0 N·m |
| Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 | 260.0 N·m |
| Maximum Net Torque - SAE J1349 | 257.0 N·m |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard. |
| Note (2) | Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
| Stroke | 120.0 mm |
| Operating Weight | 5600.0 kg |
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. - 906M is configured with a 0.9 m3 (1.2 yd3) bucket with bolt-on cutting edge. |
| Cooling System | 16.5 l |
| Engine Crankcase | 11.2 l |
| Fuel Tank | 52.0 l |
| Hydraulic System - Including Tank | 70.0 l |
| Axles - Front | N/A |
| Axles - Rear | N/A |
| Hydraulic Tank | 46.0 l |
| Transmission - Gear Box | 8.5 l |
| 3rd Function Maximum Working Pressure | 23500.0 kPa |
| Maximum Flow - Implement Pump | 73.0 l/min |
| Maximum Flow - Implement Pump - Auxiliary Function High Flow | 116.0 l/min |
| Maximum Flow - Implement Pump - Auxiliary Function Standard Flow | 73.0 l/min |
| Maximum Working Pressure - Implement Pump | 23500.0 kPa |
| Relief Pressure - Tilt Cylinder Head | 31000.0 kPa |
| Relief Pressure - Tilt Cylinder Rod | 19000.0 kPa |
| Boost Flow Maximum Pressure | 22000.0 kPa |
| Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height | 3.0 s |
| Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift | 9.6 s |
| Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s |
| Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5 s |
| Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time | 9.6 s |
| Lift Cylinder, Double Acting - Bore Diameter | 75.0 mm |
| Lift Cylinder, Double Acting - Rod Diameter | 50.0 mm |
| Lift Cylinder, Double Acting - Stroke | 695.0 mm |
| Tilt Cylinder, Double Acting - Bore Diameter | 90.0 mm |
| Tilt Cylinder, Double Acting - Rod Diameter | 55.0 mm |
| Tilt Cylinder, Double Acting - Stroke | 417.0 mm |
| Rated Bucket Capacity | 0.9 m³ |
| Clearance - Full Lift and 45° Dump | 2513.0 mm |
| Full Turn Tipping Load | 3405.0 kg |
| Reach - Full Lift and 45° Dump | 714.0 mm |
| Steering Articulation Angle - Each Direction | 39° |
| Tipping Load - Full Turn - ISO 14397-1 | 3204.0 kg |
| Tipping Load - Straight - ISO 14397-1 | 3932.0 kg |
| Articulation Angle | 39° |
| Clearance - Bucket at 45° * | 2478.0 mm |
| Clearance - Level Bucket** | 3027.0 mm |
| Departure Angle | 33° |
| Dig Depth** | 95.0 mm |
| Dump Angle at Full Lift | 45° |
| Height - Bucket Pin** | 3227.0 mm |
| Height - Ground Clearance** | 300.0 mm |
| Height - Ground to Cab** | 2463.0 mm |
| Length - Overall* | 5469.0 mm |
| Length - Wheel Base | 2170.0 mm |
| Machine Width | 1840.0 mm |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Operating Weight | 5670.0 kg |
| Reach - Bucket at 45°* | 725.0 mm |
| Turning Radius - Inside of Tires | 2240.0 mm |
| Turning Radius - Over Bucket | 4420.0 mm |
| Width - Bucket | 1890.0 mm |
| Width - Tread Center | 1420.0 mm |
| Articulation Angle | 39° |
| Clearance - Bucket at 45° * | 2359.0 mm |
| Clearance - Level Bucket** | 3035.0 mm |
| Departure Angle | 33° |
| Dig Depth** | 107.0 mm |
| Dump Angle at Full Lift | 45° |
| Height - Bucket Pin** | 3227.0 mm |
| Height - Ground Clearance** | 300.0 mm |
| Height - Ground to Cab** | 2463.0 mm |
| Length - Overall* | 5620.0 mm |
| Length - Wheel Base | 2170.0 mm |
| Machine Width | 1840.0 mm |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Operating Weight | 5663.0 kg |
| Reach - Bucket at 45°* | 820.0 mm |
| Turning Radius - Inside of Tires | 2240.0 mm |
| Turning Radius - Over Bucket | 4464.0 mm |
| Width - Bucket | 1890.0 mm |
| Width - Tread Center | 1420.0 mm |
| Bucket Capacities | 0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3) |
| General Purpose | 0.9 m³ |
| Light Material | 1.2 m³ |
| ROPS | SAE J1040 MAY94, ISO 3471-1994. |
| FOPS | SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Note (1) | Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical. |
| Forward - High Range | 35.0 km/h |
| Forward - Range 1 | 10.0 km/h |
| Forward - Range 2 | 20.0 km/h |
| Reverse - High Range | 35.0 km/h |
| Reverse - Range 1 | 10.0 km/h |
| Reverse - Range 2 | 20.0 km/h |
| Maximum Steering Torque - 0° (Straight Machine) | 50375.0 N·m |
| Maximum Steering Torque - 39° (Full Turn) | 37620.0 N·m |
| Maximum Working Pressure - Steering Pump | 22000.0 kPa |
| Nominal Flow - Steering Pump | 43.9 l/min |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | <6 turns |
| Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm | 3.0 s |
| Steering Articulation Angle - Each Direction | 39° |
| Steering Cylinder, Double Acting - Bore Diameter | 80.0 mm |
| Steering Cylinder, Double Acting - Rod Diameter | 35.0 mm |
| Steering Cylinder, Double Acting - Stroke | 300.0 mm |
| Note (1) | *Standard tire. |
| Note (2) | Other tire choices available, contact your Cat dealer for details. |
| Note (3) | In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. |
| Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Option (1) | 335/80 R18 XZSL Michelin |
| Option (2) | 340/80 R18 AT-R Firestone |
| Option (3) | 340/80 R18 XMCL Michelin |
| Option (4) | 340/80 R18 TRI2 Nokian |
| Option (5) | 340/80 R18 Bibload Michelin |
| Option (6) | 405/70 R18 SPT9 Dunlop* |
| Option (7) | 12.5/80 R18 Flexport™ |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}