| Certification: | ISO, CE |
|---|---|
| Condition: | New |
| Rated Load: | 3-6t |
| Transmission: | Hydraulic |
| Load and Unload Mode: | Front Discharge |
| Walking Mode: | Wheeled |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Parameters:
| ESCRIPTION | UNIT | DIMENSIONS | |
| A | Overall Height - Bucket Raised | mm | 5988 |
| B | Bucket Pin Height at Max. Lift | mm | 4550 |
| C | Dump Clearance at Max. Lift ( 45°) | mm | 3411 |
| D | Reach at Max. Lift and 45° Dump | mm | 1206 |
| E | Rack Back Angle at Carry | o | 49 |
| F | Rack Back Angle at Ground | o | 44 |
| G | Digging Depth | mm | 60 |
| H | Rack Back Angle at Max. Lift | o | 54 |
| I | Dump Angle at Max. Lift | o | 45 |
| J | Carry Height | mm | 311 |
| K | Ground Clearance | mm | 432 |
| L | Center Line of Front Axle to Hitch | mm | 1700 |
| M | Wheel Base | mm | 3400 |
| N | Overall Length | mm | 8610 |
| O | Departure Angle | o | 28 |
| P | Height to Top of Cab | mm | 3430 |
| Q | Overall Width over Bucket | mm | 3050 |
| R | Min. Turning Radius over Bucket | mm | 7650 |
| S | Min. Turning Radius over Tires | mm | 6797.5 |
| T | Steering Angle - Left/Right | o | 35 |
| U | Width at Tread Center | mm | 2270 |
| V | Overall Width over Tires | mm | 2865 |
Overall Date and engine &electric system
| OVERALL DATE | |||
| Bucket capacity | 3.5-5.0m³ | ||
| Rated payload | 6000kg | ||
| Operating Weight | 20850±300kg | ||
| Traction Force | 175±3kN | ||
| Breakout Force | 200±3kN | ||
| L×W×H | 8610×3050×3430mm | ||
| ENGINE&ELECTRICAL SYSTEM | |||
| lMaker/Mode | WEICHAI/WD10G240E11 | ||
| Emission Standard | EPA (Tier)/National | ||
| Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine | ||
| Rated Power | 175kW(240hp)/2200rpm | ||
| Maximum Torque | 920N·m/1300-1600rpm | ||
| Bore x Stroke (mm) | 126×130 | ||
| No. of Cylinders/Displacement | 6/9.726L | ||
| Compression Ratio | 17 | ||
| Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner | ||
| Alternator | 55Amp | ||
| Battery | 2-24V/120Ah | ||
| Starting Motor | 24V/7.5kW | ||
| Heating Capacity (W) | 5000W | ||
| Cooling Capacity (W) | 4700W | ||
Hydraulic System
| HYDRAULIC SYSTEM | ||||||
| Type | Single-lever(Joystick) Control | |||||
| Pump | Gear Pump,275L/min·2200rpm | |||||
| Control Valve | 2 Spool (Bucket&Boom) | |||||
| System Pressure | 16MPa | |||||
| Cylinder | Lift Cylinder | 2-180×864mm | ||||
| No.-Bore x stroke | Tilt Cylinder | 1-220×626mm | ||||
| Joystick Control Pressure | 2.5MPa | |||||
| Cycle Time | Raise | Dump | Lower | Total | ||
| (Sec) | 6.3 | 1.2 | 4.3 | 11.8 | ||
Drive Train
| DRIVE TRAIN | |||||
| Transmission Type | Countershaft Powershift Transmission | ||||
| Shift Type | Electronic Powershift Control | ||||
| Pressure of Transmission | 1.6-1.8MPa | ||||
| Torque Converter Type | Single-stage,Single-turbine,3-element | ||||
| Torque Ratio | 2.5 | ||||
| Axles | Rigid Front Axle&Oscillating Rear Axle | ||||
| Rear Axle Oscillation (°) | ±10° | ||||
| Differential | Conventional | ||||
| Main Reducer | Spiral Bevel,1-stage Reduction | ||||
| Tire | 23.5-25 L-3 20PR TT | ||||
| Travel Speeds | km/h | 1st | 2nd | 3rd | 4th |
| Forward | 6.7 | 11.7 | 23.8 | 37.5 | |
| Reverse | 6.7 | 11.7 | 23.8 | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}