25 ton Oriemac truck crane mobile crane QY25K5-I
1. Max. Loading: 25t
2. Engine: 211kw SC9DF290Q4
3.5 section octagonal boom 39.5m
4. Jib 8.3 m
5. Hirschmnn moment limiter
1. Octagonal cross-section boom is adopted, with light deadweight, large strength and strong load bearing capacity.
2. Advanced inserted boom head, large strength of structural parts and larger area of lower slider enable it better force applied condition and more stable telescoping, torsions of boom after side-loading can be avoided effectively.
3. Reliable telescoping mechanism design. Imported anti-torsion wire rope is adopted in thick cable of telescoping system, and imported bearings are adopted in thick cable and guide pulley, with reliable performance.
4. Excellent structural parts welding technology, all key weld beams of the whole vehicle are welded by welding manipulator, with advanced process and reliable quality.
5. Sleeve type connection is used in all pipelines, hydraulic pipelines are connected reliably with good sealing property and less leakage.
6. System configuration for extremely cold areas
1) Fluid heating system:
Heating systems are added in engine cooling system, fuel system and hydraulic oil system, engine coolant, fuel and hydraulic oil are heated by heat exchange function of the heater. The problem of driveline cannot work normally due to over low water temperature, wax precipitation of fuel and stiff hydraulic oil in cold environment is resolved. Adaptability range of product is increased, lowest temperature can reach -35° C.
2) Two cabs:
New type main body structure of driver's cab is adopted, sealing property and heater performance are improved, meanwhile sound insulation and noise reduction performance of driver's cab is improved by increasing insulation cotton, felted wool and asphalt slabs, providing a quite driving environment for customers.
Stereo air channel is added in operator's cab, heating power of air-conditioner is increased, which meets low temperature requirements in Russia areas.
7. ABS device is added; GPS port is available; Tires, lamps and glasses with E-mark are adopted, which meets certification requirements in Russia areas.
| Classificatory |
Item |
Unit |
Parameter |
| Engine |
Model |
D6114ZLQ5B |
| Outline dimension |
Overall length |
mm |
12380 |
| Overall width |
mm |
≤2500 |
| Overall height |
mm |
3500 |
| Wheel base |
Axle 1, Axle 2 |
mm |
4025 |
| Axle 2, Axle 3 |
mm |
1350 |
| Mass |
Total mass in travel state |
kg |
26400 |
| Axle load |
Axle 1 |
kg |
6530 |
| Axle 2, Axle 3 |
kg |
19870 |
| Travel performance |
Travel speed |
Max. travel speed |
km/h |
≥63 |
| Min. stable travel speed |
km/h |
≤4 |
| Turning diameter |
Min. turning diameter |
m |
≤19 |
| Min. turning diameter at boom tip |
m |
≤22 |
| Min. ground clearance |
mm |
≥273 |
| Approach angle |
(°) |
≥21 |
| Departure angle |
(°) |
≥10 |
| Braking distance (at 30km/h with full load) |
m |
≤9.5 |
| Max. grade-ability |
% |
≥23 |
| Fuel consumption for 100km |
L |
36 |
Audited Supplier 
){kind=link}
){kind=link}