| Customization: | Available |
|---|---|
| Type: | Wheel Tractor |
| Usage: | Construction |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Adopt Yangdong engine, good reliability, large reserves of torque, low fuel consumption, high economic efficiency;
Gearbox using 4 × (2 +1) engaging sleeve, shuttle-action gearshift, there are 8 forward gears, 4 reverse gears, reasonable match between the gears, and have high efficiency;
Using an independent power output device, smooth transmission, large capacity, speed (540/720, 540/1000 rev / min) for selection to meet the complex operational requirements;
Using an independent circuit of hydraulic steering control system, manipulating flexible, reliable, and save energy;
Using disc brakes, a large braking torque, the braking effect is good;
Final drive with planetary gear mechanism, compact structure, large reduction ratio;
Tractor Model |
LT300 |
LT350 |
LT304 |
LT354 |
|
Driver Type |
4×2 |
4X4 |
4X2 |
4X4 |
|
Dimension L×W×H(mm) |
3590X1485X1940 |
||||
Wheel base(mm) |
1705 |
1760 |
|||
Front wheel tread(mm) |
1100-1400 |
1200 |
|||
Rear wheel tread(mm) |
1100-1400 |
||||
Mini ground clearance(mm) |
1410 |
1480 |
1620 |
1640 |
|
Mini turning radius |
Unilateral brake(m) |
2.8 |
|||
Not unilateral brake(m) |
3.2 |
3.4 |
|||
Mini Using Weight(KG) |
1410 |
1480 |
1620 |
1640 |
|
Numbers of the gear |
8F+4R |
||||
Speed |
Forward(kw/h) |
2.07-27.08 |
2.25-29.53 |
2.07-27.08 |
2.25-29.53 |
Reverse(kw/h) |
3.07-9.35 |
3.34-10.20 |
3.07-9.35 |
3.34-10.20 |
|
Engine |
Model |
YD485T-C075 |
YND490T-C053 |
YD485T-C075 |
YND490T-C053 |
Marked power (KW) |
22.1 |
25.7 |
22.1 |
25.7 |
|
Rated revolution (r/min) |
2200 |
||||
Tires type |
Front |
5.5-16 |
6.5-16 |
7.5-16 |
|
Rear |
11.2-24 |
11.2-28 |
11.2-24 |
11.2-28 |
|
Steering |
Hydraulic front wheel steering |
||||
Max. lifting capacity( KN ) |
5 |
5.8 |
5 |
5.8 |
|
PTO |
Type |
Postposition, No Detached |
|||
Speed (r/min) |
540/1000 6 Spine |
||||
Power(kw) |
≥18.78 |
≥21.85 |
≥18.78 |
≥21.85 |
|
Control type of plough depth |
Force & Position Control |
||||
Front / rear Ballast (kg) |
80/80 |
80/100 |
80/80 |
80/100 |
|
Notice: All above parameters are subject to change without notice because of rapid development of products. |
|||||
){kind=link}