215HP Liugong new motor grader price CLG4215d
Features of LIUGONG 215HP Motor Grader CLG4215 and Parts
1. New appearance design.
2. The articulation frame is adopted and matched with the steering of the front wheel with small turning radius, maneuvering and flexible.
3. The electric- hydraulic controls the power shift gearbox with 6 ahead gears and 3 back gears.
4. The international matching hydraulic parts are adopted with reliable operation.
5. The motions of the knife are fully hydraulically controlled.
6. The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with the convenient application and the
Comfort of driving is improved.
7. The cab is grand and nice with wide eyeshot and good sealing.
8. The front bulldozing plate, rear scarification device, front scarification harrow and
Automatic leveling device can be added.
| Engine |
|
DCEC 6CTAA8.3-C215 |
| Rated Power |
(kW) |
160(215)@2200 |
| Blade Width |
mm(inches) |
3960(156) |
| Maximum Speed |
km/h (mph) |
40.3 (25) |
| Draw Bar Pull |
(kN) |
86 |
| Operating Weight |
kg(Lb) |
16500(36376) |
| ENGINE |
| Tier |
|
II |
| Make |
|
US brand |
| Gross Power |
kW(Hp)@rpm |
160(215)@2200 |
| Net Power |
kW(Hp)@rpm |
144(195)@2200 |
| Peak Torque |
|
908N.m/1500rpm |
| Torque Rise % |
|
31% |
| Number of Cylinders |
|
6 |
| Aspiration |
|
turbo air-to-air aftercooled |
| TRANSMISSION |
| Transmission Type |
|
power shift |
| Transmission Configuration |
|
6f/3r |
| Torque Converter |
|
three-member single turbine |
| Maximum Travel Speed, fwd |
(km/h) |
42 (25.8) |
| Maximum Travel Speed, rev |
(km/h) |
25.6 (15.9) |
| Number of Speeds, fwd |
|
6 |
| Number of Speeds, rev |
|
3 |
| AXLES |
| Front Axle Make |
|
LiuGong Weld axle |
| Rear Axle Make |
|
Meritor |
| Differential Type |
|
No-spin limited slip standard |
| Final Drive Type |
|
chain drive |
| Axle Oscillation |
|
±15° |
| Front Axle Type |
|
all welded steel frame |
| Front Axle, Wheel Lean Angle |
|
±17° |
| STEERING |
| Steering Configuration |
|
load sensor steering gear |
| Steering Relief Pressure |
(Mpa) |
17 |
| Minimum Turning Radius |
(inches) |
8000(315) |
| Steering Angle |
|
±45° |
| Frame Articulation Angle |
|
±20° |
| BRAKES |
| Service Brake Type |
|
(Dry)shoe |
| Service Brake Location |
|
rear axle only |
| Service Brake Actuation |
|
hydraumatic |
| TIRES |
| Tire Size |
|
17.5-25 PR12/L3 |
| HYDRAULIC SYSTEM |
| Main Pump Type |
|
gear |
| Main Relief Pressure |
(Mpa) |
18 |
| Pilot Pump Flow |
L(Gal)/min |
126(33) |
| WORKING CAPACITIES |
| Maximum Draw Pull |
(kN) |
90 |
| Cutting Pressure |
kg(Lb) |
8100(17857) |
| TANDEM DRIVE PERFORMANCE |
| Height |
mm(inches) |
600(24) |
| Width |
mm(inches) |
210(8) |
| Thickness, inner wall / outer wall |
mm(inches) |
20/20(0.8/(0.8) |
| Center Distance |
mm(inches) |
1538(61) |
| Oscillating Angle |
|
±15° |
| MOLDBOARD PERFORMANCE |
| Bank Cut Angle |
|
40~70 |
| Moldboard Lift Above Ground |
mm(inches) |
405(16) |
| Moldboard Side Shift, right / left |
mm(inches) |
725/675(29/27) |
| Maximum Sloping Angle |
|
90° |
| Cutting Depth |
mm(inches) |
600(24) |
| Circle Rotation |
|
360° |
| Circle Diameter |
mm(inches) |
1455(57) |
| Circle Thickness |
mm(inches) |
140(6) |
| DIMENSIONS |
| Wheelbase |
mm(inches) |
6230(245) |
| Overall Length |
mm(inches) |
8971(353) |
| Overall Height with Cab |
|
3438(135) |
| Overall Width |
mm(inches) |
2600(102) |
| Clearance under Front Axle |
mm(inches) |
645(25) |
| Moldboard Standard Length |
mm(inches) |
4270(168) |
| Moldboard Standard Thickness |
mm(inches) |
19(0.7) |
| Moldboard Standard Height |
mm(inches) |
650(24) |
| OPERATING WEIGHTS |
| Operating Weight |
kg(Lb) |
16500(36376) |
| On Front Wheels |
kg(Lb) |
4700(10362) |
| On Rear Wheels |
kg(Lb) |
11800(26015) |
| SERVICE CAPACITIES |
| Fuel Tank |
L(Gal) |
230(61) |
| Engine Oil |
L(Gal) |
22(6) |
| Cooling System |
L(Gal) |
45(12) |
| Hydraulic Reservoir |
L(Gal) |
186(49) |
| Transmission And Torque Converter |
L(Gal) |
45(12) |
| Tandems, Each |
L(Gal) |
28(7) |
PHOTOS
COMPANY INFO:
){kind=link}